Burn-In Chamber ㅤ ㅤ ㅤ ㅤ ㅤ ㅤ-

Burn-In Chamber ㅤ ㅤ ㅤ ㅤ ㅤ ㅤ

Integral aging property description: 1. All electronic products 2. The number of chambers can be selected according to the needs of different scales, flexible and mobile. Note: Each parameter, size and appearance can be customized according to custom...

Walk-in Stability Chamberㅤ ㅤ ㅤ-HYHW

Walk-in Stability Chamberㅤ ㅤ ㅤ

HYHW

Mainly composed of control panel, vertical distribution cabinet, moisturizing storehouse board, air supply fan, heater, humidifier and refrigeration unit, it is aimed at high performance electronic products (e.g. computer whole machine, display, comp...

HYHW-8C walk-in constant temperature and humidity test chamber-HYHW-8C

HYHW-8C walk-in constant temperature and humidity test chamber

HYHW-8C

1. Scope of application It is suitable for high and low temperature tests, damp and heat tests on electrical, electronic, mechanical and other products, parts and materials, and quality and reliability testing of products, parts and materials under simulated temperature and humidity changes. 2. Meet the standards Requirements of GB5170, 2, 5-2008 "Basic parameter verification methods for environmental testing equipment for electrical and electronic products: Low temperature, high temperature, constant humidity and heat, and alternating humidity and heat testing equipment"; GB/T 2423.1-2008 "Basic Environmental Test Procedures for Electrical and Electronic Products - Test A: Low Temperature Test Method"; GB/T 2423.2-2008 "Basic Environmental Test Procedures for Electrical and Electronic Products - Test B: High Temperature Test Method"; GB/T 2423.3-2016 "Basic Environmental Test Procedures for Electrical and Electronic Products - Test Ca: Constant Humidity and Heat Test Method"; GB/T 2423.4-2008 "Basic Environmental Test Procedures for Electrical and Electronic Products - Test Db: Alternating Humid Heat Test Method"; GB/T 2423.22-2012 "Basic Environmental Test Procedures for Electrical and Electronic Products - Test N Temperature Change Test Method"; GB/T 5170.2-2008 "Temperature Test Equipment"; GB/T 5170.5-2008 "Damp and Heat Test Equipment"; GB/T 10592-2008 "Technical Conditions for High and Low Temperature Test Chambers"; GB/T 10589-2008 "Technical Conditions for Low Temperature Test Chamber"; GB/T 10586-2006 "Technical Conditions for Humid Heat Test Chamber"; GJB 150.3A-2009 "Military Equipment Laboratory Environmental Test Methods Part 3: High Temperature Test"; GJB 150.4A-2009 "Military Equipment Laboratory Environmental Test Methods Part 4: Low Temperature Test"; GJB 150.9A-2009 "Military Equipment Laboratory Environmental Test Methods Part 9: Damp Heat Test"; GB/T 11158-2008 "Technical Conditions for High Temperature Test Chamber" 3. Product Features Descript

Container walk-in explosion-proof test chamber Manufacturer-HY

Container walk-in explosion-proof test chamber Manufacturer

HY

Container walk-in explosion-proof test chamber product solution The walk-in explosion-proof container is not a simple container, but a hazardous waste temporary storage cabinet, which is mainly used for storage and testing equipment in explosive environments. The storage of battery waste before destruction or regeneration is very important. The lack of a safe storage environment for flammable and hazardous chemicals can easily cause fires or leakage of toxic chemicals, endangering people's lives and property. Therefore, it is particularly important to use container walk-in explosion-proof test chambers for temporary storage and classification. Below, Environmental Instruments will share with you a battery explosion-proof container solution that was recently designed for a customer. flow chart: S1 Build multiple flame-retardant and water-tight isolation warehouses: put a battery pack in each isolation warehouse S2 sets the top of each isolation bin as an open opening, extends the water inlet pipe into the isolation bin from the opening, and sets an overflow pipe in each isolation bin. S3 monitors the temperature and smoke conditions of each isolation warehouse S4 When an abnormality occurs in the isolation warehouse, fill the isolation warehouse with water. S5 drains water through the overflow pipe and specifically collects discharged wastewater to prevent wastewater from polluting the environment. Main parameters of the container: Temperature range: -70℃~+150℃ Humidity range: 20~98%R.H Humidity fluctuation: ±2%R.H Temperature fluctuation: ±0.5℃ Temperature uniformity: ±2℃ Temperature deviation: ≤2℃ Power supply: AC 380V±10% 50Hz±10% Design method: Set up multiple isolation warehouses that are physically isolated from each other in the container box. The circumference of the isolation warehouse is a firewall. A flame-retardant material layer is set inside each firewall. The top of each isolation warehouse is an open opening. From the opening, Extend the water in

Automobile Comprehensive Test Chamber-

Automobile Comprehensive Test Chamber

The automotive environmental test chamber can be applied to M1, M2, and N1 ignition engines with a total mass of not more than 3,500 KG. The vehicle is tested according to the emission regulations of China III, IV, Euro III, and Euro IV and the follo...